Maytronics offers upgraded ‘Dolphin Triton PS’ cleaner

The upgraded Dolphin Triton PS Plus Robotic Pool Cleaner, from Maytronics, of Duluth, Ga., delivers exceptional cleaning performance with intense scrubbing and filtering.

Nimble on vertical surfaces, the Triton, with PowerStream technology, propels water in many directions to create a constant grip for precise cleaning along the water line. Active brushing by large, quickly spinning brushes dislodges stubborn stuck-on grime. Anti-tangling algorithms keep the cleaner operating smoothly.

The Triton is lightweight and easy to handle thanks to its sleek, ergonomic body style. Removal of the filter basket for cleaning is simplified due to the large hinged top cover that lifts up for convenient access.

The MyDolphin Plus app, which can be connected to the cloud using a home’s Wi-Fi®, allows users to remote control the Dolphin. Use the app to schedule weekly cleanings, cycle options and spot cleanings; to check operation status; and to get proactive care tips.

This versatile cleaner, designed for pools up to 50 feet, works well on all pool surface types and comes with a 24-month limited warranty.

For more information, contact Maytronics, Dept. SI, 2221 Northmont Pkwy., Ste. 400, Duluth, GA 30096. Telephone 888-365-7446. Visit the company online at www.maytronicsus.com.

Pool Blok

® Tile and Concrete Cleaner, from US Pumice Co., of Chatsworth, Calif., does the job where chemicals fail.

Pool Blok’s mild abrasive action quickly removes lime, rust, stains and algae deposits from ceramic tile, molded and pneumatic-formed concrete surface pools, spas and water features without the need for draining. It also cleans grout and it floats.

Ready to use and chemically neutral, Pool Blok will not upset pH balance and requires no gloves or applicators. The pole adapter fits all standard telescopic poles. It is a safe product that will not irritate skin and and can be used around children and pets.

Pool Blok, the original gray pumice cleaner, in use for over 75 years, is offered in a size for every need, including spot, surface and underwater cleaning. It is available at local pool suppliers and distributors nationwide.

For more information, contact US Pumice Co., Dept. SI, 20219 Bahama St., Chatsworth, CA 91311. Telephone 800-423-3037. Online www.uspumice.com.

Intex ‘Krystal Clear’ 2,500

GPH filter cartridge pump

The Intex

® 2,500 GPH Krystal Clear

™ Filter Cartridge Pump for above-ground pools, from Intex Corp., of Long Beach, Calif., boasts a pump flow rate of 2,500 gallons per hour and a system flow rate of 1,900 gallons per hour.

Hydro Aeration

® Technology provides improved circulation, filtration and water clarity. It also increases negative ions at the water surface.

Specially designed for above-ground pools, this double-insulated pump installs easily; just attach hoses and plug it in. Features include an automatic timer with preset 2- to 12-hour cycles, an air release valve and a sediment flush valve.

The unit comes with an easily cleaned replaceable filter cartridge and one Hydro Aeration® technology inlet fitting. Plunger valves and 1.5-in. outlet fittings are not included.

The pump, suitable for pools of 4,000 to 15,200 gallons, conforms to UL/CSA standards and is backed by a two-year limited warranty. The unit uses Type B filter cartridges that should be changed every two weeks.

For more information, contact Intex Corp., Dept. SI, 1665 Hughes Way, Long Beach, CA 90810.

‘Olympic Prep Magic’ prepares pools for new paint

OlympicPrepMagic,fromKelleyTechnicalCoatings, of Louisville, Ky., is a one-step clean and etch product that quickly and easily prepares pool surfaces for paint. This VOC-compliant low-odor, bio-degradable product is simple to use and eliminate the extra steps of traditional pool surface preparation. Just mix Prep Magic with water, apply and rinse. That is all that is required to apply a fresh coat of paint. To wash a pool, mix 8 ounces of prep Magic to each gallon of warm water. Dip a brush in the solution and firmly scrub the pool surface in 10-ft. sections. Then rise off the residue with clear water to neutralize. Prep Magic is safe to use on bare concrete, fiberglass, marcite, plaster, painted surfaces, gunite and marble. One gallon will treat about 70 sq. ft. It is safe to use near plants and grass and is versatile enough to also be used for pool filter cleaning.

For more information, contact Kelley Technical Coatings,Dept.SI,1445S.15thSt.,Louisville,KY40210. Telephone 800-458-2842. Online www.kelleytech.com.

Kem-Tek ‘KTK 50-0006’ algacide from KIK Pool

Kem-Tek KTK-50-0006 Pool and Spa 60-Percent Concentrated Algaecide, from KIK Pool Additives, Inc., of Lawrenceville, Ga., is the highest strength polymer algaecide available for pool use.

The non-foaming formula provides long-lasting action for effective treatment and prevention of algae to help clarify cloudy pool water. KTK-50-0006 is a salt-system-friendly product that can safely be used with all pool and filter types.

KTK-50-0006 is available in 32-ounce size bottles.

For more information, contact KIK Consumer Products, Dept. SI, 1725 N. Brown Rd., Lawrenceville, GA 30043. Telephone 678-502-4000. Online www. kikcorp.com.

Nidec offers ‘Neptune’ efficient VS pump motor

The Neptune

™ Variable Speed Pool Pump Motor, from Nidec Motor Corp., of St. Louis, Mo., with fully integrated motor, control and user interface, and the ability to operate with a variety of external system controllers, provides programming flexibility and speed range capability.

By replacing an old single-speed pump motor with an easily installed and programmed Neptune, customers can quickly upgrade a properly functioning pump by turning it into a more energy-efficient product. A factory-installed run schedule allows the unit to function after setting the time of day.

The rugged enclosure of finned aluminum provides a water ingress protection level of IPX5 for longer field life in outdoor conditions. A low-temperature monitor can be set so the motor will automatically turn on during cold temperatures to keep water moving and help prevent pipe damage.

An outstanding feature of the Neptune is how quietly it runs. The motor control has no switching mechanisms, and when programmed for slower speeds, sound levels are typically much reduced compared to an older single-speed-motor-powered pump.

Other features include the ability to set up to seven daily schedules, adjustable priming time and speed and a menu keypad lockout feature. This fully integrated product enables simple drop-installation with no complex motor and control wiring; simply connect to the power supply and the unit is ready.

For more information, contact Nidec Motor Corp., Dept. SI, 8050 W. FlorissantAve., St. Louis, MO 63136. Phone 888-637-7333. Online www.acim.nidec.com.