Pool Tiger was designed to harness an all-natural process known as Hydrodynamic Cavitation: A process that relies solely on the flow of water as driven by the pool pump.

The device uses cavitation that occurs when water accelerates within the device’s nozzle. This acceleration drops the pressure of the water below the vapor point, resulting in the formation of small vapor bubbles. As the vapor bubbles exit the nozzle, the pressure of the surrounding water causes them to rapidly collapse and revert to a liquid state once again.

These factors are sufficient to: Oxidize and destroy exposed contaminants; Initiate the gradual decomposition of acids – this raises pH and eliminates excessive levels of cyanuric; Change the polarity of suspended particles, causing them to agglomerate to a size at which they are easily captured by the filter – this clarifies water and creates a more inviting swimming environment Constructed of hardy thermoplastic, Pool Tiger has no moving parts and is easy to install. It ships fully assembled with unions and requires no electricity. Unless a loop is required due to space considerations on existing equipment sets, an experienced installer should be able to complete the installation within 15 minutes.

For more information contact, Pool Tiger, 835 SE 30th St. Ste. C, Oklahoma City, OK 73129. Telephone 405-636-5266. Online at www.pooltiger.com.