Posted on

CUBEiT! removes pop-up heads from in-floor sytems

CUBEiT! removes pop-up heads from in-floor sytems CUBEiT! removes pop-up heads from in-floor sytems

Tampa Bay Pool Tool Makers PoolPal USA and Multi-Tork Pool Tools have collaborated on a universal pool floor pop-up head removal tool. The six sides of CUBEiT! have alignment pins for virtually every brand of pop-up floor cleaning system in the industry. On the pool deck, connect any standard pool pole to the CUBEiT! channel connector with the threaded bolt and wing nut and insert the channel connector’s 3/8” drive bit into the CUBEiT! 3/8” drive hole opposite the removal pin side. In the water, insert the CUBEiT! alignment pins directly into the floor head. For hard to remove heads, insert a screwdriver through the channel connector’s two 3/8” holes for additional torque.

Contact: PoolPal USA (877) 825-7665; Multi-Tork Pool Tools (888) 929.7818 Email: [email protected], [email protected], Visit online at www.poolpalusa and www.muIti-tork.com

Leave a Reply

Your email address will not be published. Required fields are marked *

LATEST NEWS